|Year : 2017 | Volume
| Issue : 2 | Page : 157-164
Current perspectives on biomedical waste management: Rules, conventions and treatment technologies
Malini R Capoor1, Kumar Tapas Bhowmik2
1 Department of Microbiology, Bio-medical Waste Unit, VMMC and Safdarjung Hospital, New Delhi, India
2 Department of Radiotherapy, Bio-medical Waste Unit, VMMC and Safdarjung Hospital, New Delhi, India
|Date of Web Publication||5-Jul-2017|
Malini R Capoor
Department of Microbiology, Bio-medical Waste Unit, VMMC and Safdarjung Hospital, New Delhi - 110 029
Source of Support: None, Conflict of Interest: None
Unregulated biomedical waste management (BMWM) is a public health problem. This has posed a grave threat to not only human health and safety but also to the environment for the current and future generations. Safe and reliable methods for handling of biomedical waste (BMW) are of paramount importance. Effective BMWM is not only a legal necessity but also a social responsibility. This article reviews the current perspectives on BMWM and rules, conventions and the treatment technologies used worldwide. BMWM should ideally be the subject of a national strategy with dedicated infrastructure, cradle-to-grave legislation, competent regulatory authority and trained personnel. Improving the management of biomedical waste begins with waste minimisation. These standards, norms and rules on BMWM in a country regulate the disposal of various categories of BMW to ensure the safety of the health-care workers, patients, public and environment. Furthermore, developing models for the monitoring of hospital health-care waste practices and research into non-burn eco-friendly sustainable technologies, recycling and polyvinyl chloride-free devices will go in long way for safe carbon environment. Globally, greater research in BMWM is warranted to understand its growing field of public health importance.
Keywords: Biomedical waste management rules 2016, biomedical waste, treatment technologies
|How to cite this article:|
Capoor MR, Bhowmik KT. Current perspectives on biomedical waste management: Rules, conventions and treatment technologies. Indian J Med Microbiol 2017;35:157-64
|How to cite this URL:|
Capoor MR, Bhowmik KT. Current perspectives on biomedical waste management: Rules, conventions and treatment technologies. Indian J Med Microbiol [serial online] 2017 [cited 2018 Feb 20];35:157-64. Available from: http://www.ijmm.org/text.asp?2017/35/2/157/209592
| ~ Introduction|| |
Expansion of health-care facilities as well as the recent trends of using plastic disposables and increase in medical and surgical interventions has led to unprecedented burden of biomedical waste (BMW). Unregulated BMW management (BMWM) has posed a grave threat not only to human health and safety but also to environment for the current and future generations.
A prior study estimated that about half of world's population is at risk from hazards of improper BMWM either through impact at work in the environment or impact on public health. The public health threat due to improper BMWM has been reported worldwide. Of note are the incidence of hepatitis B virus (HBV) outbreak (240 infected) at Gujarat, India, in 2009 and infectious injuries to scavengers due to BMW generated in mass vaccinations (1.6 million) in Afghanistan.
A nationwide survey performed by International Clinical Epidemiology Network in 25 districts across 20 states highlighted that only two big cities in India, Chennai and Mumbai, had comparatively better system for BMWM. Improper pretreatment of BMW at source and improper terminal disposal was the major challenges observed. It was observed that around 82% of primary, 60% of secondary and 54% of tertiary care health facilities were in the red category, i.e., the absence of a credible BMWM in place or ones requiring major improvement. According to the studies conducted by the World Health Organization (WHO) in 22 developing countries showed that the proportion of health-care facility (HCF) that do not use proper waste disposal methods range from 18% to 64%. In India, annually about 0.33 million tons of BMW is generated and rate ranges from 0.5 to 2.0 kg per bed per day. The poor BMWM practices are attributed to lack of awareness and training as was concluded in a recent study.
India was one of the first countries to implement BMWM rules in 1998 (amended as draft in 2003, 2011) under Environment Protection Act (EPA), 1986. India was signatory to an international legally binding and environmental treaty, Stockholm Convention, 2004, on persistent organic pollutants (POPs) that aims to eliminate or restrict production of POPs.
The Ministry of Environment Forests and Climate Change, Government of India, notified the BMWM rules, 2016 on 28th March 2016, under the provisions of EPA, 1986. These rules fill up the gaps in the old rules to regulate the disposal of various categories of BMW.
Safe and reliable methods for handling of BMW are of paramount importance. Effective BMWM is not only a legal necessity but also a social responsibility. This article reviews the current perspectives on BMWM in the national and the international scenario and rules, conventions and the treatment technologies used worldwide.
| ~ Definition|| |
BMW is any waste, which is generated during the diagnosis, treatment or immunisation of human beings or animals or in research or in the use of biological or in health camps. It involves all persons who generate, collect, receive, store, transport, treat, dispose or handle biomedical waste in any form., Of the total BMW about 75% and 90% of the waste is non-hazardous or general health-care waste. The remaining 10%–25% of BMW is regarded as hazardous and can lead to a variety of environmental and health risks.
| ~ Classification|| |
Hazardous health-care waste includes sharp waste, infectious waste, pathological waste, pharmaceutical waste, cytotoxic waste, chemical waste, liquid infectious waste, radioactive waste, and general health-care waste.
| ~ International Agreements and Conventions|| |
The Basel Convention
It regulates the transboundary movements of hazardous and other wastes under the “prior informed consent” as per national or domestic legislation to prevent and punish illegal traffic in hazardous and other wastes.
The Stockholm Convention, 2006
The Stockholm Convention on POPs is a global treaty to protect human health and the environment from POPs. POPs are polychlorinated dibenzo-p-dioxins and dibenzofurans that are stable and have widely distributed, accumulate in the fatty tissue and are toxic to humans and wildlife. It is essential to reduce or eliminate releases of POPs by incinerators and other combustion processes through best available techniques (BAT) guidelines and promote best environmental practices (BEP) for new incinerators within 4 years., The training, collection, transport, source reduction, segregation, resource recovery and recycling are BEP. The BAT guidelines for BMW incinerators and waste water require to achieve air emission levels of dioxins and furans no higher than 0.1 ng I-TEQ/Nm3 and aims at alternative technologies.
Aarhus Convention of the United Nations Economic Commission for Europe, 1998
This convention focuses on access to information, public participation in decision-making and aims at access to justice in environmental matters and rights.
The International Solid Waste Association
It is an independent, international and non-profit making association and aims to promote and develop sustainable and professional waste management worldwide.,,
The WHO policy paper suggests that government organisations adopt recycling, polyvinyl chloride (PVC)-free medical devices, risk assessment and sustainable technologies to promote environmentally sound management of BMW.,
| ~ Biomedical Waste Management Rules, 2016 (Ministry of Environment Forests and Climate Change)|| |
The ambit of the rules has been expanded to include vaccination camps, blood donation camps, first aid rooms of schools, forensic laboratories, medical colleges, research laboratories, household BMWs and other such camps/programmes, any other health-care activity related to any system of medicine, apart from HCF. Duties of occupier, common biomedical waste (CBMW) management disposal facility and authorities are delineated better.
The occupier ensures the pretreatment of the laboratory waste, microbiological waste, blood samples and blood bags through disinfection or sterilisation on-site in the manner as prescribed. Occupier provides training, immunisation, health check-up and occupational safety to all its health-care workers (HCWs). The major accidents are also reported to the prescribed authority and in the annual report. The occupier establishes a system to review and monitor the activities related to BMWM a committee. The occupier and CBMWTDF are liable for damages caused to environment or public due to improper handling BMW under section 5 and section 15 of Act.
In BMWM rules, 2016, emission standards and other standards of equipment, effluent, pits are delineated. For traceability of the BMW, bar coding and GPS are introduced. Emphasis has been laid on accident reporting, records and website related to BMW. In the final disposal technologies, sustainable, eco-friendly (plasma pyrolysis), green technologies, newer technology, waste to energy options and recycling (authorised recyclers) are mentioned.
The salient differences between BMWM rules 2016 and BMW rules 1998 are depicted in [Table 1].
|Table 1: The salient differences between biomedical waste management rules 2016 and biomedical waste rules 1998|
Click here to view
The biomedical waste not documented in the current rules of the country should have a company buy back policy or should be treated as per recommended international guidelines.
| ~ Risks Associated With Biomedical Waste|| |
The main groups of individuals at risk are HCWs, scavengers and the public. The microbial infections caused by exposure to BMW and samples include systemic and local infections.,, Mercury, disinfectants and pesticides affect multisystems. Improper handling of sharps can lead to needle stick injuries thereby leading to infections with blood-borne pathogens such as HBV, HIV and HCV, etc.,, The hazards of cytotoxic and radioactive waste include headache, dizziness, vomiting, tissue destruction, genotoxicity, death and ecological disturbances. It can cause malignancies, foetal malformation, cardiac and respiratory disorders.
| ~ Steps in Management of Biomedical Waste: Segregation, Package and Transport|| |
The mainstay of waste-segregation system is to separate all hazardous waste from the larger quantity of non-hazardous general waste. The waste is segregated into different fractions based on their potential hazard and disposal route and separate containers should be available for each segregated waste fraction.
Special category of waste disposal
Mutilation of plastics and sharps
To prevent reuse of plastics and sharps, mutilation is required on-site before transportation to CBMWTF. A needle destroyer or hub-cutter is used to destroy/mutilate the needles, and then, the later are put into the tamper proof, leak proof, puncture proof container.,, All the plastic items, intravenous (IV) bottles, urobags, drains and gloves are given a nick or clipped immediately after use, wherever applicable, by the dedicated pair of scissors placed in the area to prevent reuse, and then, they should be disposed in a red bag. Each bag is labeled and securely tied when three-fourth full and then handed over to CBMWTF for recycling.,
From the novel technique of encapsulation, the recycled sharps can be used for benches, hangers, bricks, etc.,
Discarded medicines (cytotoxic drugs and antibiotics)
Cytotoxic wastes including all items contaminated with cytotoxic drugs are put in a non-chlorinated yellow container, sealed and labelled as cytotoxic. Expired cytotoxic drugs to be returned to the manufacturer or supplier for incineration at temperature > 1200°C. The antibiotic and other drugs are discarded in yellow bag with biohazard label. Dilution in water and discharge into a sewer for solutions containing vitamins, cough syrups, IV solutions and eye drops, salts, amino acids is recommended.
Mercury and lead waste
The mercury and lead waste generated are contained and then handed over to authorised vendors and covered under the respective rules. The WHO guidelines on mercury lays stress on safe mercury clean-up, handling and storage procedures, replacing mercury-containing products with mercury-free alternatives in the long term.
Disposal of radioactive waste
The treatment and disposal of radioactive waste are under national nuclear regulatory agency and under its respective rule. For isotopes with long half-life, long-time storage at an authorised waste disposal site is recommended. Infectious radioactive waste to be decontaminated after containment by decay time (ten times the half-life) in an isolated, identified and designated room site before final disposal as BMW. Low-level radioactive waste can be discharged in sewers.
Liquid chemical waste
Liquid waste generated due to the use of chemicals in production of biologicals, used or discarded disinfectants, infected secretions, aspirated body fluids liquid from laboratory, labour room, operation theatre, floor washings, cleaning, housekeeping and disinfecting activities should be collected separately and directed to effluent treatment plant (ETP). The infected body secretions such as blood and faeces should be pre-treated and then disposed of in ETP. Silver X-ray film developing liquid, after resource recovery, the chemical liquid waste needs to be pre-treated before mixing with waste water.
The blood sample glass vials or broken or discarded and infected glass need to be disinfected/autoclaved, (pretreatment), wherever applicable and then packed in cardboard boxes with plastic liner with blue-coloured marking and sent to CBMWTF for autoclaving or microwaving for final recycling. The non-infected glass does not need on-site pretreatment.,,
Microbiology, biotechnology waste and infectious waste
Laboratory waste including microbiology laboratory cultures, stocks or specimens of microorganisms and infectious waste of patients in isolation have to be pre-treated on site by autoclaving in an autoclave safe plastic bags or containers ,, as per the WHO guidelines there after sent for final disposal of autoclaved hazardous waste in yellow bag to CBMWTDF for incineration.
The discarded blood bags are to be counted, sealed, weighed and all the records to be made then packed in autoclave-safe plastic bags or containers to be autoclaved on site and then these are sent for incineration.
Packaging, labelling and transport to common waste site
All the biomedical wastes are labelled as waste type, site of generation, date of generation before transportation from the generation site. BMW is transported through designated route, on dedicated, colour coded, covered and leak proof trolleys on fixed and at reliable time and stored in a common waste site. From common waste site, it is then transported to CBMWTF for the final treatment and disposal. No untreated BMW is kept stored beyond a period of 48 h.
Each patient care area has been provided with the waste receipt book to record the quantity/number of yellow, blue, red, white (translucent) bags handed over to HCW. All the staff are required to duly fill in the waste book colour code wise mentioning the number and size of bags handed over and sign the slip for further record.
Transport staff should wear adequate personal protective equipment. The central storage site is cleaned once a week. It should have an impermeable, hardstanding floor with good drainage, include the facility to keep general waste separated from BMW, have an exhaust and water supply as per the WHO guidelines.,,
Transportation to common biomedical waste treatment facility
The operator of CBMWTF shall transport the BMW from the premises of HCF to any off-site CBMWTF only in the vehicles complying as per the existing rules of the country or as per the United Nation norms. The body of the vehicle should be of a suitable size to carry secured load and it should have BMW articles, PPE and cleaning equipment. It should be marked with the name and address of the waste carrier, hazard sign.
| ~ Minimal Approach to Biomedical Waste Management|| |
Minimal approach in BMWM includes reducing, reusing and recycling, arrangements for waste storage and transport, expenses in the annual budgeting; separate chemical and pharmaceutical waste segregation and storage management, separate storage zones and documentation related to BMWM.
| ~ Waste Treatment Technologies|| |
The waste treatment technologies include thermal, chemical processes, irradiation technologies, biological processes, disinfection and sterilisation.
Thermal: Autoclaves: Steam treatment technologies
Autoclaves sterilise a range of infectious waste (cultures, stocks, sharps, materials contaminated with blood and fluids), laboratory waste and linen waste, medical instruments and for the treatment of BMW. Unlike instrument sterilisation autoclaves, waste-treatment autoclaves (prevaccum autoclaves) must treat the air that is removed at the start of the process to prevent the release of pathogenic aerosols through a high-efficiency particulate air filter before it is released and therefore require less time for action and have greater efficiency.
The autoclaves should be able to withstand the repeated build-up and release of steam pressures and should have construction materials, engineering design, fabrication, accuracy of pressure and temperature sensors, and testing must meet basic requirements to operate safely as per the international standards related to pressure vessels including EN 13445, EN 285 and ASME. The operation of autoclave requires a minimum of recommended temperature–exposure time criterion of 121°C for 30 min, pressure of 205 kPa or 2.05 bar (15 psig or 30 psia).,
After the initial tests, regular validation tests using biological indicators (weekly), Bowie-Dick test (for prevaccum autoclaves with every batch) and thermochromics strips should be performed at periodic intervals.,,
Autoclaves for medical devices often use trays or stainless steel baskets, while waste autoclaves use autoclavable carts or bucket-shaped open containers into which the plastic waste bags are stacked. Depending on the type of plastic bags used, some bags may melt and stick to the surfaces of the cart or container. Use of autoclavable plastic bags or liners that prevent sticking is an option.
A post-treatment shredder or grinder could be used if the waste is to be rendered unrecognisable and if reduction of waste volume is desired. Advanced single- or multiple-shaft shredders specially made for medical waste can reduce waste volume by about 80%. The advanced shredders are typically low-speed, high-torque, single-pass shredders with easily replaceable cutters and with discharge screens to control the size of shredded waste.
Microwave treatment technologies
Microwave technology is a steam-based process where the treatment occurs through the action of moist heat and steam generated by microwave energy with a cycle of 30 min to 1 h. The types of waste treated are cultures and stocks, sharps, materials contaminated with blood and body fluids, other infected waste, laboratory waste and soft waste (e.g., gauze, bandages, gowns and bedding). Microwave treatment should not be used for cytotoxic, volatile compounds, hazardous or radioactive wastes, contaminated animal carcasses, body parts and large metal items. Biological indicators for microwave are Bacillus atrophaeus spores using vials or spore strips with at least 104 spores.
Dry heat treatment technologies
Hot air ovens have been used to sterilise glassware and other reusable instruments and infectious health waste. The waste is heated by conduction, natural or forced convection or thermal radiation at higher temperatures (up to 185°C) and longer exposure times (90–150 min) than steam-based processes. It should completely and consistently kill the biological indicator Geobacillus stearothermophilus hilus or B. atropheus spores using vials with at least log106 spores per ml or by a chemical indicator strip.,
Sodium hypochlorite (NaOCl, 1-12%)
Chemical disinfection is most suitable for treating liquid waste. Recently, commercial, self-contained and fully automatic systems have been introduced which are more reliable than the manual autoclave.
Chemical disinfectants: The disinfectants used are chlorine compounds, aldehydes, lime-based powders or solutions, ozone gas, ammonium salts and phenolic compounds.
Sodium hypochlorite (NaOCl, 2%–12%): It is active against bacteria, viruses and spores, not effective for disinfection of liquids with high organic content, (blood or stool) and is widely used owing to relatively mild health hazards. Unused solutions should be reduced with sodium bisulphite or sodium thiosulphate and neutralised with acids before discharge into sewers. PPEs should be worn to protect HCWs. Chlorine dioxide is an alternative to hypochlorite. It is a toxic but soluble and stable in water and can be generated onsite.
Lime-based chemical treatment systems use dry powder or calcium hydroxide solutions. Glutaraldehyde and peracetic acid are used to disinfect instruments.,
Incineration is an increased temperature, dry oxidation process that reduces organic and combustible waste to inorganic, incombustible matter and results in a significant reduction of waste volume and weight, at temperatures from 600°C to more than 1000°C through combustion, pyrolysis or gasification under standard conditions. Its disadvantages include release of combustion by-products (dioxins and furans) and residual ash. The incinerator emissions should comply with national standards and in accordance with the Stockholm Convention BAT and BEP.,,
The waste types which are not included for incineration are pressurised gas containers; reactive chemical waste; silver salts and photographic or radiographic wastes, PVC plastics, heavy metals, batteries, sealed ampoules or vials, radioactive materials, unstable pharmaceuticals.,,
Encapsulation and inertisation
Encapsulation involves filling containers (polyethylene/metallic) with waste, adding an immobilising material (plastic foam, bituminous sand, cement mortar, or clay) and sealing the containers. It is used for pharmaceuticals and for incineration ashes with a high metal content. Following filling, the containers are sealed and placed into landfill sites to prevent scavengers gaining access to it and prevention of percolation into groundwater.
Emerging technologies include plasma pyrolysis, alkaline hydrolysis, superheated steam, ozone and promession.
Plasma pyrolysis makes use of an ionised gas in the plasma state to convert electrical energy to temperatures of several thousand degrees using plasma torches or electrodes with minimal or no air. It is used to break down pathological waste, infectious, plastic, hazardous chemical or pharmaceutical wastes. It is safe, eco-friendly, has energy recovery and has negligible harmful emissions of dioxins and furans. Production of clean alloyed slag which could be used in construction material and value added products such as metals. Its disadvantages include large initial investment costs, carbon dioxide pollution, large electrical energy input, highly corrosive plasma flame leading to frequent maintenance.,,,
Ozone (O3) can be used for especially pharmaceutical waste, water and air treatment. It is a strong oxidizer and breaks down to a more stable form (O2). Ozone systems require shredders and mixers to expose the waste to the bactericidal agent. Regular tests should be conducted to ensure that the microbial inactivation standard is met.
It includes freeze-drying using liquid nitrogen and mechanical vibration to disintegrate cadavers into powder before burial. The process speeds up decomposition, reduces both mass and volume and allows the recovery of metal parts.
It is a process that converts body parts, specimens and cadavers into a decontaminated aqueous solution and destroys fixatives, hazardous chemicals and waste contaminated by prion. After the waste is loaded in the basket and into the hermetically sealed tank, alkali is added along with water at temperature of 127°C or higher and stirred. After digestion time of 6–8 h, by-products include mineral constituents of bones and teeth, solution of amino acids, sugars, soaps and salts. It can also destroy chemotherapeutic or cytotoxic agents and aldehydes (such as formaldehyde and glutaraldehyde) commonly used in hospitals.
It is used to cleanse environmental air to improve indoor quality air and includes a photo catalyst with wide spectrum of light and is bactericidal and fungicidal. It utilises the energy from light to generate hydroxyl species and superoxide anion (O2-) which decompose and oxidise toxic pollutants to carbon dioxide and water.
It is a novel technology for disinfection and decontamination of hospital waste water which utilises solar energy or ultraviolet rays to disinfect microbes and decontaminate antibiotic from waste water at the point of origin. It is efficient and affordable technology.
It combines the biological-activated sludge process with a membrane filtration step for sludge water separation. Various types of membrane bioreactor (MBRs) are available such as aerobic MBR, anaerobic MBR, organic pollutant MBR.,
Other emerging technologies for destruction of BMW include gas-phase chemical reduction, base-catalysed decomposition, supercritical water oxidation, sodium reduction, verification, superheated steam reforming, Fe-TAML/peroxide treatment (pharmaceutical waste), biodegradation (using mealworm or bacteria to eat plastics), mechanochemical treatment, sonic technology, electrochemical technologies, solvated electron technology and phytotechnology. These emerging technologies are not ready for routine application to health-care waste.
| ~ Biomedical Waste Management International Scenario|| |
At the global level, 18%–64% of HCFs have unsatisfactory BMWM facilities; predictors include lack of awareness, insufficient resources and poor disposal mechanisms. In South-East Asian region countries, 56% of facilities lack adequate waste disposal and treatment.
Similar situation existed in several other developing countries such as Iran, Nigeria, Senegal and Pakistan and the authors reported poor infrastructure, state of collection, transportation, disposal, training, capacity building, PPEs and resource constraints in BMWM.,,
In India, it was observed in many studies the gap in knowledge and practice in relation to availability of resources and processes in place was found as was the need for organised training and structured supervision to bridge this gap. A study on tertiary care hospitals in India found that people with higher education such as consultants, residents and scientists had good knowledge of biomedical rules but was not reflected in their practices.,,,, Prior studies from geographically diverse states of India revealed that awareness among hospital staffs regarding segregation of BMW was slightly higher in urban areas compared to rural areas and that employee training and awareness can be a major determinant of establishing optimal BMWM., A multistate study revealed that surveillance and monitoring of BMWM were consistently deficient; BMWM was alarming both at macro- and micro-levels across different parts of country. It was observed that the process of BMWM were poor and unacceptable across levels of HCFs and were poorest in primary care settings as compared to secondary and tertiary care settings.
| ~ Conclusions|| |
BMWM should ideally be the subject of a national strategy with dedicated infrastructure, cradle-to-grave legislation, competent regulatory authority and trained personnel. Improving the management of biomedical waste begins with waste minimisation. These standards, norms and rules on BMWM in a country regulate the disposal of various categories of BMW are envisaged therein, so as to ensure the safety of the staff, patients, public and the environment, in furtherance to its vehement commitment, to ensure the fundamental right to live in clean and safe environment. The novel waste which is generated but not documented in rules should have a company buy back policy or should be treated as per recommended guidelines of Centers for Disease Control and Prevention or WHO. Furthermore, developing models for the monitoring of hospital health-care waste practices and research into non-burn eco-friendly sustainable technologies, recycling and PVC-free devices will go in long way for safe carbon environment. Globally, greater research in BMWM is warranted to understand its growing field of public health importance.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| ~ References|| |
Chartier Y, Emmanuel J, Pieper U, Prüss A, Rushbrook P, Stringer R, et al
., editors. Safe Management of Wastes from Health-Care Activities. 2nd
ed. Geneva, Switzerland: WHO Blue Book; 2014.
Harhay MO, Halpern SD, Harhay JS, Olliaro PL. Health care waste management: A neglected and growing public health problem worldwide. Trop Med Int Health 2009;14:1414-7.
INCLEN Program Evaluation Network (IPEN) Study Group, New Delhi, India. Bio-medical waste management: Situational analysis and predictors of performances in 25 districts across 20 Indian States. Indian J Med Res 2014;139:141-53.
Mathur V, Dwivedi S, Hassan M, Misra R. Knowledge, attitude, and practices about biomedical waste management among healthcare personnel: A cross-sectional study. Indian J Community Med 2011;36:143-5.
] [Full text]
David JJ, Shanbag P. Awareness and practices regarding biomedical waste management among health-care workers in a tertiary care hospital in Delhi: Comment. Indian J Med Microbiol 2016;34:391-2.
] [Full text]
The Gazette of India Biomedical Wastes (Management and Handling) Rules, India: Ministry of Environment and Forests, Government of India. Notification Dated 20th
Secretariat of the Stockholm Convention. Revised Draft Guidelines on Best Available Techniques and Provisional Guidance on Best Environmental Practices of the Stockholm Convention on Persistent Organic Pollutants. Geneva: Secretariat of the Stockholm Convention; 2006.
Bio-Medical Waste Management Rules, 2016. Published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-Section (i), Government of India Ministry of Environment, Forest and Climate Change. Notification; New Delhi, the 28th
Pennsylvania Department of Environmental Protection (PA-DEP), 25 PA Code. Disposal of Infectious and Chemotherapeutic waste. Chapter 284. Regulated medical and chemotherapeutic waste. Disposal of Infectious and Chemotherapeutic waste. Web link: http://www.pacode.com/secure/data/025/chapter284/chap284toc.html
. [Last accessed on 2017 May 3].
National Research Council. Safe disposal of infectious laboratory waste. Biosafety in the Laboratory: Prudent Practices for Handling and Disposal of Infectious Materials. Washington, DC: The National Academies Press; 1989.
WHO. Review of health impacts from microbiological hazards in health-care wastes. Geneva: World Health Organization; 2004.
IARC. Laboratory Decontamination and Destruction of Carcinogens in Laboratory Waste: Some Antineoplastic Agents. IARC Scientific Publications, No. 73. Lyon: International Agency for Research on Cancer; 1985. Available from: http://www.iarc.fr
. [Last accessed on 2017 May 3].
UN. Guidelines for Safe Disposal of Unwanted Pharmaceuticals in and After Emergencies. Geneva: World Health Organization; 2010.
Facility Guidelines Institute. Guidelines for Design and Construction of Hospital and Health Care Facilities. Chicago: American Society for Healthcare Engineering of the American Hospital Association; 2010.
Widmer AF, Frei R. Decontamination, disinfection, sterilization. In: Versalovic J, Carroll KC, Funke G, Jorgensen JH, Landry ML, Warnock DW, editors. Manual of Clinical Microbiology. 10th
ed., Wahington DC, USA: ASM Press; 2011. p. 143-73.
Rutala WA, Weber DJ and the Healthcare Infection Control Practices Advisory Committee (HICPAC). Guideline for Disinfection and Sterilization in Healthcare Facilities. Atlanta: Centres for Disease Control; 2008.
Emmanuel J, Stringer R. For proper disposal: A global inventory of alternative medical waste treatment technologies. Arlington: Health Care without Harm; 2007.
Emmanuel J. Non-incineration medical waste treatment technologies. Washington, DC: Health Care without Harm; 2001.
Central Pollution Control Board Report on Plastic Waste Disposal through Plasma Pyrolysis Technology. cpcb.nic.in/upload/Latest/Latest_142_Plasma_Pyrolysis_final_Report_21-11-16%20.pdf. [Last accessed on 2016 Oct].
Non-Incineration Medical Waste Treatment Technologies, Health Care Without Harm 1755 S Street, N.W. Suite 6B, Washington, DC 20009. Available from: http://www.noharm.org. 2001
. [Last accessed on 2017 May 3].
Nema SK, Ganeshprasad KS. Plasma pyrolysis for medical waste. Curr Sci 2002;83:271-8.
European Commission Scientific Steering Committee. Updated Opinion and Report on a Treatment of Animal Waste by Means of High Temperature and High Pressure Alkaline Hydrolysis. Brussels: Scientific Steering Committee, European Commission, Health and Consumer Protection Directorate-General; 2003. Available from: http://www.ec.europa.eu/food/fs/sc/ssc/out297_en.pdf
. [Last accessed on 2017 May 3].
Qu X, Alvarez PJ, Li Q. Applications of nanotechnology in water and wastewater treatment. Water Res 2013;47:3931-46.
Alrhmoun M. Hospital Wastewaters Treatment: Upgrading Water System Plans and Impact on Purifying Biomass. Environmental Engineering Universite de Limoges; 2014. Available from: https://www.tel.archives-ouvertes.fr
. [Last accessed on 2017 May 3].
Judd S, Judd C, editors. Principles and Applications of Membrane Bioreactors for Water and Wastewater Treatment System. 2nd
ed. United Kingdom: Elsevier; 2011.
EPA. Reference Guide to Non-Combustion Technologies for Remediation of Persistent Organic Pollutants in Stockpiles and Soil. Report No. EPA-542-R-05-006. Washington, DC: United States EPA; 2005.
Askarian M, Vakili M, Kabir G. Hospital waste management status in university hospitals of the Fars province, Iran. Int J Environ Health Res 2004;14:295-305.
Abah SO, Ohimain EI. Healthcare waste management in Nigeria: A case study. J Public Health Epidemiol 2011;3:99-110.
Ali S, Mahmood U, Malik AU, Aziz F, Naghman RB, Ahmed I. Current hospital waste management practices in Pakistan: Case study and curative measures. Public Health Prev Med 2015;1:125-9.
Bhagawati G, Nandwani S, Singhal S. Awareness and practices regarding bio-medical waste management among health care workers in a tertiary care hospital in Delhi. Indian J Med Microbiol 2015;33:580-2.
] [Full text]
Saini S, Nagarajan SS, Sarma RK. Knowledge, attitude and practices of bio-medical waste management amongst staff of a tertiary level hospital in India. J Acad Hosp Adm 2005;17:1-12.
Sarotra P, Medhi B, Kaushal V, Kanwar V, Gupta Y, Gupta AK. Health care professional training in biomedical waste management at a tertiary care hospital in India. J Biomed Res 2016;30:168-70.
United Nations Industrial Development Organization (UNIDO). UNIIDO Launches of 40 Million Dollar Project to Help India Dispose of Bio-Medical Waste; 11 February, 2010. Available from: http://www.unido.org/news/press/unido-waste-2.html
. [Last accessed on 2013 May 12].